Gas Hose & BSP Threaded Fittings

Gas Hose & Fittings

Let's be honest here, neither flexible gas hose nor the associated brass fittings to use it are that exciting. It doesn't matter whether you have a big luxury motorhome, a small camper-van, a touring caravan, a static mobile home, a sailing boat on the high seas, or a narrowboat for chilling-out on our beautiful canals... neither gas hose nor the associated fittings are going to get you hugely excited.

But good quality gas fittings, and the flexible gas pipe that goes between them, are critical to the safe enjoyment of your travelling home. We're therefore pleased to sell both [low pressure gas hose[99001]] and [high pressure gas hose[99002]], both by the metre and in 50m rolls if you have a bigger job planned, together with a range of BSP threaded brass fittings that push into the end of the hose, in all sizes from [1/8" BSP male to 8mm ID hose[32270]] through to [1/2" BSP female to 5/16" bore tubing[32282]]. Note that both gas hose and nozzles are the same item regardless of whether you use 8mm or 5/16" flexible pipe, a rare example of where the metric and Imperial measuring systems don't clash too badly.

If you're after some pre-made hoses, including with POL threads, take a look at our ready-made gas hose assemblies & gas pigtails.

SAFETY NOTE: The current advice is that you should replace your flexible gas hoses every few years for safety reasons. Don't take chances with your, or your family's, safety. Always get any gas work you do on your caravan checked afterwards by a competent professional.